{"id":1611519164471,"title":"Edge Products 98602 Accessory System EAS (Expandable) - EAS Starter Kit Cable","handle":"edge-products-98602-accessory-system-eas-expandable-eas-starter-kit-cable","description":"\u003cmeta charset=\"utf-8\"\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cb\u003eApplication: Designed for use with the EDGE Products CS and CTS\u003c\/b\u003e\u003cspan\u003e\u003c\/span\u003e\n\u003cp\u003eOne Cable required to start EAS system.\u003c\/p\u003e\n\u003cp\u003eThe Edge accessory (EAS) was created with future expandability in mind. The architecture of the EAS allows users to connect multiple accessories daisy-chain style to the Evolution CS or CTS. This means Edge can create optional accessories that can be added by the owner at any time. A second exhaust gas temperature (EGT) probe is one example of an optional accessory that will be offered by Edge.\u003c\/p\u003e\n\u003cp\u003eMy Style Software\u003cspan\u003e \u003c\/span\u003e\u003cbr\u003eAdd up to 16 additional sensors with the EAS universal sensor input. Then setup, configure and customize those sensors through Edge's My Style software package. Then Edge My Style software will recognize and Universal Sensor Input that has been connected to your CS or CTS and allow the user to change PID name, gauge name description and units. The user can choose from a number of preconfigured sensors or enter in a custom look-up table to translate the input voltage to the measured parameter value and units.\u003c\/p\u003e\n\u003cp\u003eEGT PROBE\u003cspan\u003e \u003c\/span\u003e\u003cbr\u003eThe EGT probe is a sensor that allows users to monitor critical Exhaust Gas Temperatures to ensure added power is not creating excessive heat which, in turn can can cause engine damage. With EAS system a user can connect multiple EGT sensors to monitor temperatures in different locations and compare readings to be even more precise.\u003c\/p\u003e\n\u003cp\u003eTURBO TIMER\u003cspan\u003e \u003c\/span\u003e\u003cbr\u003eA turbo timer is a device designed to keep an engine running for a pre-specified period of time or a until a specific temperature is reached in order to automatically execute the cool-down period required to prevent premature turbo wear and failure. This also allows the lubricating oil from the engine to circulate properly so the turbine won't burn the lubricating oil that would otherwise be trapped within the charger with the turbine rotating at a high speed.\u003c\/p\u003e\n\u003cp\u003eEAS UNIVERSAL SENSOR INPUT\u003cspan\u003e \u003c\/span\u003e\u003cbr\u003eThe EAS Universal Sensor Input provides the ability to read any 0-5 volt signal and translate that signal a meaningful value for display on the Edge CS or CTS. This means you can add custom temperature, pressure, Air\/fuel and even travel\/position gauges to your Edge CS and CTS! Using the Edge Accessory System provides the following benefits:\u003c\/p\u003e\n\u003cli\u003eUsing My Style software, sensors can be easily configured and renamed.\u003c\/li\u003e\n\u003cli\u003eUp to 8 Universal Sensor Input will support up to 2 sensors for the vehicle. Each Universal Sensor Input will support up to 2 sensors for a total of 16 additional sensors that can be added to your CS or CTS device.\u003cspan\u003e \u003c\/span\u003e\u003cbr\u003eNote: Sensors from the manufactures other than Edge can also be attached to a CS or CTS device through the EAS universal sensor input.\u003c\/li\u003e\n\u003cli\u003eEliminates the necessity of routing multiple wires to the CS\/ CTS monitor.\n\u003cp\u003eEAS PRESSURE SENSOR\u003cspan\u003e \u003c\/span\u003e\u003cbr\u003eEdge's EAS pressure sensor is a 0-50 PSIA 1\/8\" NPT sensor that plugs directly into the Universal sensor input system (p\/n 98605). Edge's pressure sensor comes equipped with the proper wires and connectors to plug right into the Universal Sensor Input system saving time and money on cutting, splicing and crimping wire terminals to connect the sensor. Use Edge's pressure sensor to monitor data such as boost PSI, fuel rail pressure air bag pressure, lift pump pressure, pre and post intercooler pressure and many more.\u003c\/p\u003e\n\u003cp\u003eEAS TEMPERATURE SENSOR\u003cspan\u003e \u003c\/span\u003e\u003cbr\u003eThe EAS Temperature Sensor is a -40F to 300F 1\/8 NPT supplied with the connectors to plug directly into Edge's Universal Sensor Input System. Using Edge's Temperature Sensor you can monitor Transmission Temp, Differential\/Axel Oil Temp, Oil Temp, Engine Coolant Temp, Air intake temp, Pre and Post Intercooler Temp and many more. Use this in conjunction with the Universal Sensor Input and the CS and CTS monitor to allow you to view critical temperatures with the most state-of- the- art product on the market today.\u003c\/p\u003e\n\u003cp\u003eEAS AMBIENT TEMPERATURE SENSOR\u003cspan\u003e \u003c\/span\u003e\u003cbr\u003eIf your vehicle is not equipped with an outside temperature sensor then this is a must have! The EAS Ambient Temperature Sensor is a -40F to 230 F Waterproof 0.2\" diameter sensor ready to plug into Edge's Universal Sensor Input system. Now you'll never wonder what outside temperature is again.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003e*Note: One cable required to start EAS system.\u003c\/b\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cbr\u003e\n\u003cul\u003e\u003c\/ul\u003e","published_at":"2019-06-13T22:06:32-05:00","created_at":"2019-06-13T22:06:32-05:00","vendor":"Edge","type":"Tuners \u0026 Modules","tags":["03-07 Cummins Programmers","07.5-09 Cummins Programmers","10-12 Cummins Programmers","13+ Cummins Programmers","1994-2002 Dodge 5.9L Cummins","2003-2007 Dodge 5.9L Cummins","2006-2007 5.9L Cummins","2007-2009 6.7L Cummins","2010-2012 Dodge 6.7L Cummins","2011-2016 6.7L Powerstroke","2013+ Dodge 6.7L Cummins","2017+ 6.7L Powerstroke","6.0L Powerstroke","6.0L Programmers","6.4L Powerstroke","6.4L Programmers","6.7L Powerstroke","6.7L Powerstroke Programmers","7.3L Powerstroke","7.3L Programmers","99-02 Cummins Programmers","all","best seller","Brand_Edge","edge","L5P","L5P Programmers","LB7","LB7 Programmers","LBZ","LBZ Programmers","LLY","LLY Programmers","LML","LML Programmers","LMM","LMM Programmers","Make_Chevy\/GMC","Make_Dodge","Make_Ford","Year_1994","Year_1995","Year_1996","Year_1997","Year_1998","Year_1999","Year_2000","Year_2001","Year_2002","Year_2003","Year_2004","Year_2005","Year_2006","Year_2007","Year_2008","Year_2009","Year_2010","Year_2011","Year_2012","Year_2013","Year_2014","Year_2015","Year_2016","Year_2017","Year_2018","Year_2019"],"price":4217,"price_min":4217,"price_max":4217,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":14092266700855,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"EDG98602","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Edge Products 98602 Accessory System EAS (Expandable) - EAS Starter Kit Cable","public_title":null,"options":["Default Title"],"price":4217,"weight":907,"compare_at_price":null,"inventory_management":null,"barcode":""}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0082\/9607\/1223\/products\/98602.1.jpg?v=1560481654"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0082\/9607\/1223\/products\/98602.1.jpg?v=1560481654","options":["Title"],"content":"\u003cmeta charset=\"utf-8\"\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cb\u003eApplication: Designed for use with the EDGE Products CS and CTS\u003c\/b\u003e\u003cspan\u003e\u003c\/span\u003e\n\u003cp\u003eOne Cable required to start EAS system.\u003c\/p\u003e\n\u003cp\u003eThe Edge accessory (EAS) was created with future expandability in mind. The architecture of the EAS allows users to connect multiple accessories daisy-chain style to the Evolution CS or CTS. This means Edge can create optional accessories that can be added by the owner at any time. A second exhaust gas temperature (EGT) probe is one example of an optional accessory that will be offered by Edge.\u003c\/p\u003e\n\u003cp\u003eMy Style Software\u003cspan\u003e \u003c\/span\u003e\u003cbr\u003eAdd up to 16 additional sensors with the EAS universal sensor input. Then setup, configure and customize those sensors through Edge's My Style software package. Then Edge My Style software will recognize and Universal Sensor Input that has been connected to your CS or CTS and allow the user to change PID name, gauge name description and units. The user can choose from a number of preconfigured sensors or enter in a custom look-up table to translate the input voltage to the measured parameter value and units.\u003c\/p\u003e\n\u003cp\u003eEGT PROBE\u003cspan\u003e \u003c\/span\u003e\u003cbr\u003eThe EGT probe is a sensor that allows users to monitor critical Exhaust Gas Temperatures to ensure added power is not creating excessive heat which, in turn can can cause engine damage. With EAS system a user can connect multiple EGT sensors to monitor temperatures in different locations and compare readings to be even more precise.\u003c\/p\u003e\n\u003cp\u003eTURBO TIMER\u003cspan\u003e \u003c\/span\u003e\u003cbr\u003eA turbo timer is a device designed to keep an engine running for a pre-specified period of time or a until a specific temperature is reached in order to automatically execute the cool-down period required to prevent premature turbo wear and failure. This also allows the lubricating oil from the engine to circulate properly so the turbine won't burn the lubricating oil that would otherwise be trapped within the charger with the turbine rotating at a high speed.\u003c\/p\u003e\n\u003cp\u003eEAS UNIVERSAL SENSOR INPUT\u003cspan\u003e \u003c\/span\u003e\u003cbr\u003eThe EAS Universal Sensor Input provides the ability to read any 0-5 volt signal and translate that signal a meaningful value for display on the Edge CS or CTS. This means you can add custom temperature, pressure, Air\/fuel and even travel\/position gauges to your Edge CS and CTS! Using the Edge Accessory System provides the following benefits:\u003c\/p\u003e\n\u003cli\u003eUsing My Style software, sensors can be easily configured and renamed.\u003c\/li\u003e\n\u003cli\u003eUp to 8 Universal Sensor Input will support up to 2 sensors for the vehicle. Each Universal Sensor Input will support up to 2 sensors for a total of 16 additional sensors that can be added to your CS or CTS device.\u003cspan\u003e \u003c\/span\u003e\u003cbr\u003eNote: Sensors from the manufactures other than Edge can also be attached to a CS or CTS device through the EAS universal sensor input.\u003c\/li\u003e\n\u003cli\u003eEliminates the necessity of routing multiple wires to the CS\/ CTS monitor.\n\u003cp\u003eEAS PRESSURE SENSOR\u003cspan\u003e \u003c\/span\u003e\u003cbr\u003eEdge's EAS pressure sensor is a 0-50 PSIA 1\/8\" NPT sensor that plugs directly into the Universal sensor input system (p\/n 98605). Edge's pressure sensor comes equipped with the proper wires and connectors to plug right into the Universal Sensor Input system saving time and money on cutting, splicing and crimping wire terminals to connect the sensor. Use Edge's pressure sensor to monitor data such as boost PSI, fuel rail pressure air bag pressure, lift pump pressure, pre and post intercooler pressure and many more.\u003c\/p\u003e\n\u003cp\u003eEAS TEMPERATURE SENSOR\u003cspan\u003e \u003c\/span\u003e\u003cbr\u003eThe EAS Temperature Sensor is a -40F to 300F 1\/8 NPT supplied with the connectors to plug directly into Edge's Universal Sensor Input System. Using Edge's Temperature Sensor you can monitor Transmission Temp, Differential\/Axel Oil Temp, Oil Temp, Engine Coolant Temp, Air intake temp, Pre and Post Intercooler Temp and many more. Use this in conjunction with the Universal Sensor Input and the CS and CTS monitor to allow you to view critical temperatures with the most state-of- the- art product on the market today.\u003c\/p\u003e\n\u003cp\u003eEAS AMBIENT TEMPERATURE SENSOR\u003cspan\u003e \u003c\/span\u003e\u003cbr\u003eIf your vehicle is not equipped with an outside temperature sensor then this is a must have! The EAS Ambient Temperature Sensor is a -40F to 230 F Waterproof 0.2\" diameter sensor ready to plug into Edge's Universal Sensor Input system. Now you'll never wonder what outside temperature is again.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003e*Note: One cable required to start EAS system.\u003c\/b\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cbr\u003e\n\u003cul\u003e\u003c\/ul\u003e"}

Edge Products 98602 Accessory System EAS (Expandable) - EAS Starter Kit Cable

Product Description
Application: Designed for use with the EDGE Products CS and CTS

One Cable required to start EAS system.

The Edge accessory (EAS) was created with future expandability in mind. The architecture of the EAS allows users to connect multiple accessories daisy-chain style to the Evolution CS or CTS. This means Edge can create optional accessories that can be added by the owner at any time. A second exhaust gas temperature (EGT) probe is one example of an optional accessory that will be offered by Edge.

My Style Software 
Add up to 16 additional sensors with the EAS universal sensor input. Then setup, configure and customize those sensors through Edge's My Style software package. Then Edge My Style software will recognize and Universal Sensor Input that has been connected to your CS or CTS and allow the user to change PID name, gauge name description and units. The user can choose from a number of preconfigured sensors or enter in a custom look-up table to translate the input voltage to the measured parameter value and units.

EGT PROBE 
The EGT probe is a sensor that allows users to monitor critical Exhaust Gas Temperatures to ensure added power is not creating excessive heat which, in turn can can cause engine damage. With EAS system a user can connect multiple EGT sensors to monitor temperatures in different locations and compare readings to be even more precise.

TURBO TIMER 
A turbo timer is a device designed to keep an engine running for a pre-specified period of time or a until a specific temperature is reached in order to automatically execute the cool-down period required to prevent premature turbo wear and failure. This also allows the lubricating oil from the engine to circulate properly so the turbine won't burn the lubricating oil that would otherwise be trapped within the charger with the turbine rotating at a high speed.

EAS UNIVERSAL SENSOR INPUT 
The EAS Universal Sensor Input provides the ability to read any 0-5 volt signal and translate that signal a meaningful value for display on the Edge CS or CTS. This means you can add custom temperature, pressure, Air/fuel and even travel/position gauges to your Edge CS and CTS! Using the Edge Accessory System provides the following benefits:

  • Using My Style software, sensors can be easily configured and renamed.
  • Up to 8 Universal Sensor Input will support up to 2 sensors for the vehicle. Each Universal Sensor Input will support up to 2 sensors for a total of 16 additional sensors that can be added to your CS or CTS device. 
    Note: Sensors from the manufactures other than Edge can also be attached to a CS or CTS device through the EAS universal sensor input.
  • Eliminates the necessity of routing multiple wires to the CS/ CTS monitor.

    EAS PRESSURE SENSOR 
    Edge's EAS pressure sensor is a 0-50 PSIA 1/8" NPT sensor that plugs directly into the Universal sensor input system (p/n 98605). Edge's pressure sensor comes equipped with the proper wires and connectors to plug right into the Universal Sensor Input system saving time and money on cutting, splicing and crimping wire terminals to connect the sensor. Use Edge's pressure sensor to monitor data such as boost PSI, fuel rail pressure air bag pressure, lift pump pressure, pre and post intercooler pressure and many more.

    EAS TEMPERATURE SENSOR 
    The EAS Temperature Sensor is a -40F to 300F 1/8 NPT supplied with the connectors to plug directly into Edge's Universal Sensor Input System. Using Edge's Temperature Sensor you can monitor Transmission Temp, Differential/Axel Oil Temp, Oil Temp, Engine Coolant Temp, Air intake temp, Pre and Post Intercooler Temp and many more. Use this in conjunction with the Universal Sensor Input and the CS and CTS monitor to allow you to view critical temperatures with the most state-of- the- art product on the market today.

    EAS AMBIENT TEMPERATURE SENSOR 
    If your vehicle is not equipped with an outside temperature sensor then this is a must have! The EAS Ambient Temperature Sensor is a -40F to 230 F Waterproof 0.2" diameter sensor ready to plug into Edge's Universal Sensor Input system. Now you'll never wonder what outside temperature is again.

    *Note: One cable required to start EAS system.


    • $42.17
      Maximum quantity available reached.

      Related Products