• Cast Aircraft Quality Aluminum Transmission Pan for the 2003-2007 6.3 Liter Torqueshift 5R110 Power Stroke Diesel F250/350/450 Trucks and Excursions. Capacity Increase of 4.5 Fluid Quarts, Decreases Operating Temperatures as Much as 30 Degrees.
• The PML transmission pans are manufactured from aircraft quality sand cast aluminum.
• The gasket surfaces are precision CNC machined to eliminate any possibility of leaks. The gasket surface is designed to use either the re-useable OEM gasket or high temperature RTV (silicone). Plus, if you need to service any part of your transmission and damage the "moulded in shape" 0 ring that some manufacturers use in place of a gasket you will not be able to buy a replacement locally and will have to wait for parts delivery to complete the transmission service.
• The design of the casting increases the rigidity of your transmission case as well as provides a boss to locate your transmission temperature gauge sender. If you haven't added a temperature gauge, please check the gauge selection area of our site.
• You might also notice that the pans are NOT powder coated! You are buying a high capacity pan to lower fluid temps and prolong the life of your transmission, powder coating is an excellent insulater, it holds the heat in the pan!
• Increased lubricant capacity can also hinder the transmissions ability to cool the fluid. Too much increased fluid capacity will ONLY keep your transmission fluid cooler upon initial start up. Once all the fluid is up to the same operating temperature the transmissions ability to cool the excess fluid will actually over tax the pump and the coolers capacity to exchange fluid heat to the air. The pump and cooler is designed to flow "X" fluid efficiently, if you exceed the pumps capacity you will increase temps and waste fluids at maintenance intervals.
Every PML pan is supplied with all the necessary socket head cap screw fasteners and a magnetic drain plug, instructions for installation and technical number for any questions you might have.

$209.00

• This harness overrides Torque Converter (T/C) lockup.
• The included Green LED allows you to monitors Torque Converter (T/C) lockup by the Power train Control Module (PCM, part of the emission system).
• Upgrade to a Lead Free ON "Constant"-OFF-(ON "Momentary") Toggle Switch (Full On Position, Momentary On Position, and Off (Stock) position.
• Easy 2 wire hook up and a ground.
• Installation instruction available on the documentation section.
• Free Shipping! (To lower 48 states)

$79.99

• The kit includes everything you need for a perfect installation and fit.
• Get better filtration over your internal filter.
• Removes 99.997% of all wear metal particles.
• Perma-Cool Filter.
• Ideal protection for new vehicles or when rebuilding or installing a remanufactured transmission, power steering pump or gear.
• Replace every 30,000 miles or 12 months for optimal protection.

$109.00

• The kit includes everything you need for a perfect installation and fit.
• Get better filtration over your internal filter.
• Magnetic In-line (3/8" inlet and outlet) Filter.
• Removes 99.997% of all wear metal particles.
• Install in Minutes.
• Ideal protection for new vehicles or when rebuilding or installing a remanufactured transmission, power steering pump or gear.
• Replace every 30,000 miles or 12 months for optimal protection.

$39.00

• SCT XCAL 3 Programmer, w/Custom Tunes. Adds up to 150 Horse Power, 290 ft-lbs torque!
• Fits all 99-Up 7.3L and 6.0L Powerstroke Turbo Diesel Engines (F-250, F-350).
• MagnaFlow Stainless T-409 Turbo Back System.
• AFE Stage I Cold Air Intake System.
• 3-Gauge Painted Pillar with Boost, Trans, and EGT Autometer Gauges.
  
• Fully Painted, Pre-assembled and wired (Ultralite, Z-Series, Phantom, or Sport-Comp)
• Free Shipping in the Lower 48 States!
• Choose your paint option HERE.

Now $1,299.99